What a slow-draining sink is telling you
In the kitchen, water sometimes drains a small trickle but builds up when you wash dishes. That means the outlet isn't fully closed, but its flow is reduced. Food particles mixed with grease may be in the trap and also in the pipe behind the wall. You can't judge the inside of the pipe just because the surface looks clean.
Compare how it is now with the past few days. A gradual slowdown and a sudden complete stop tell us different things. Think back: did a large bit of waste get washed down, or was the trap replaced? If water passes into the other bowl of a double sink, the shared outlet needs checking. If fixtures in another room have slowed down too, the cause may be further along. Testing with a big flow of fresh water doesn't make anything simpler in this case.
What you can check without chemicals
First, remove only the waste you can see on the strainer or an easy-to-reach filter. There's no need to poke anything sharp into the pipe. Only consider taking the trap apart if you know how to put it back, haven't used chemicals and the joints are sound. Forcing old, brittle or hard-to-reach parts turns a minor slowdown into a leak.
Put a container underneath before taking it apart, because water stays in the trap. If you aren't confident about this job, stick to cleaning the surface. A photo of a joint that's dry on the outside will also help us. The point of checking yourself isn't to take the pipes apart completely; it's to remove simple waste and gather information that narrows down the search for the cause. Don't open the trap if any cleaning product is in it.
- 1.Stop adding water and watch whether the level goes down.
- 2.Clean the sink strainer and safely remove any visible waste.
- 3.Remember what product you used and whether the result was only temporary.
- 4.If water is also coming back at another point, stop trying locally.
The plunger: simple, but not for every case
A sink plunger tries to shift a small obstruction by moving the water. The rubber needs a tight seal, and air escaping from the overflow hole or the second bowl reduces the effect. Use moderate strokes. If the trap wobbles, the joints leak or water comes up, more force won't solve the problem and you should stop.
Don't use a plunger after a chemical cleaner: splashes will get the substance onto skin and into eyes. Pouring in a second product isn't a way to continue the first attempt either. If a moderate attempt doesn't work, you need to find where the obstruction is. Sometimes water passes for a while, but the mass on the pipe walls stays. Don't call that a full clean, and if it happens again, check the cause more thoroughly.
When a chemical cleaner creates another problem
Chemical products differ in composition and don't suit every pipe, surface or fixture. Some work on organic waste but can't fix a solid object, a wrong gradient or a damaged joint. In a fully blocked pipe, the product may just sit in one place. Exceeding the instructions or repeating often doesn't guarantee a result; material incompatibility and the heat released can even cause damage.
Don't mix different cleaners, and don't add bleach, acid or other household substances. Baking soda and vinegar are not a safe way to neutralise an unknown product that's already been poured in. If you used a product, tell the technician its name and when you used it. Keep the packaging out of children's reach. That way we know what may be in the pipe and can prepare to work with the right care.
When a drain snake is the right tool
With a drain snake we reach the obstruction mechanically. The tool has to suit the pipe diameter, the entry point and the bends. It doesn't always just punch through the blockage: with the right head, some waste is pulled out or broken up. Still, an opened narrow passage doesn't always mean the whole layer of grease is gone. We judge the result by how the water flows and by signs of recurrence.
A random wire forced into the pipe is no substitute for a professional drain snake. The wrong tool can get stuck, damage a joint or move the waste to another section. If the pipe is old, damage is suspected or the problem appeared after renovation, we first find out the condition. A drain snake makes sense when we know where it will be used and what the obstruction is likely to be; when things are unclear, diagnosis is part of the job.
When water jetting is needed
If a sink slows down again after being cleared, the issue may be grease built up along a long section of pipe. Water jetting doesn't focus on just one blockage: with the right nozzle we work over the whole inner surface of the pipe. The method has to suit the pipe's condition and the outlet for the water and washed-out debris. Jetting isn't the first or required choice for every sink.
A crack, a collapsed section or a wrong gradient won't be fixed by jetting. When that's suspected, the pipe's condition needs further assessment. Habits matter after cleaning too: wipe leftover grease out of the pan first, catch food scraps with a strainer and don't use the sink as a bin. If the problem keeps coming back, tell us about the previous work and how long the result lasted. We give you the price on the phone and choose the method based on the cause.
Using the sink and running the dishwasher often load the same outgoing pipe. If the slowdown only shows when the dishwasher empties, mention that too. The position of the appliance hose, the trap connection and the shared outlet need to be assessed together. An error message on the dishwasher doesn't in itself prove the drain is blocked; the cause may be inside the appliance. Gather the symptoms beforehand so the right section can be checked and water doesn't build up from running it again and again.
