Skip to content
Sewage Pumping

How to unclog a blocked toilet

Toilet blocked and the water is high in the bowl? First of all, stop flushing. A second flush can fill the space left in the bowl and send water onto the floor. Then check whether the problem affects only the toilet or whether other fixtures have changed too. These two observations will help you decide whether a simple check is possible or whether it's better to wait for help.

Technician clearing a bathroom floor drain with an electric drain snake

First, stop more water coming in

Water filling the toilet cistern and water coming back from the sewer are two different things. Closing the cistern's supply valve stops fresh water, but it can't stop backflow from the shared pipe. If the water keeps rising when you aren't using anything, let the neighbours know and don't assume it's a local blockage.

Only turn the valve if it is easy to reach and moves normally. Don't force a stuck handle: damaging it will cause another leak. Pick things up off the floor only from the dry side. Keep children and pets out of the bathroom, because overflow water is contaminated. Gloves don't make working in contaminated water safe.

  1. 1.Stop pressing the flush button and tell others not to use the toilet.
  2. 2.If you can do it safely, close the water valve at the cistern.
  3. 3.From a dry spot, look at the water level and the state of the other fixtures.
  4. 4.If the level is rising by itself, stop all attempts and call us.

Just the toilet, or several fixtures?

If the drain is blocked, first look at how far the problem has spread. If the sink was working normally and the problem only started after flushing, the cause may be in the toilet's curved outlet or the pipe close to it. A blockage of waste and an outlet plugged by a solid object don't call for the same approach. Think back: did an object, part of a toilet cleaner or a sanitary product fall in? Knowing what went missing is more useful than several hard flushes, which will only push it deeper.

If water is also coming up in the bathroom floor drain, the sink is gurgling or the floor below has a similar problem, the shared section needs checking. Don't turn on taps on purpose to find out: running extra water into an already loaded line makes the damage worse. Write down what you noticed before. A single sign can't prove exactly where the blockage is; in the end we also need to know how the line is laid out.

When it's OK to try a plunger

Only consider a plunger when the water isn't rising, there is still room before it overflows and you haven't poured in any chemical drain cleaner. A rubber cup designed for toilets seals the outlet better than a flat sink plunger. The aim is to move the water gently back and forth, not to strike hard. Sharp movements cause splashes and don't always improve the result.

Press the rubber tightly over the outlet and make the first stroke slowly, so the air inside doesn't burst out. After a few calm strokes, watch the level. If nothing changes, stop trying over and over. If you suspect a solid object, even a plunger can push it deeper. In that case we'd rather first work out what needs to come out and from which side a tool can reach it.

Why chemicals and boiling water aren't worth it

Chemical liquid left in the toilet can get onto skin or into eyes during the next attempt, and mixing different products can cause a dangerous reaction. If you've already used one product, don't add another and don't use a plunger either. Keep the packaging or note the name, so you can tell the technician exactly what is in the water.

Pouring in boiling water is a bad idea too: a sudden temperature change is bad for ceramics and joints, and it won't break down a solid object. Poking with a wire coat hanger can scratch the surface or leave something in the pipe. A home-made blast of air isn't the answer either. When the cause is unknown, adding new substances or force makes diagnosis harder and increases the risk of contaminated water overflowing.

The water went down — is the problem solved?

A falling level only means the water has found a way out. It doesn't yet confirm that the whole obstruction is gone. If flushing slows again, air comes up, or the same thing happens after a few uses, we need to find the recurring cause. Sometimes it's an object left in the pipe, sometimes sediment, and sometimes a problem with a joint or the way the pipe is laid.

Don't start testing while there is still contaminated water on the floor or backflow is visible at another point. Once the original situation is dealt with, watch how it behaves in normal use. Note when the problem comes back: straight away, only after a lot of water, or when the neighbours are using water. These differences tell us which section to check and what kind of further check we need.

How to reduce the chance of it happening again

A small bin by the toilet is more useful than pouring in strong cleaner from time to time. Wet wipes don't break down in water like ordinary toilet paper, and a promise on the packaging doesn't mean they'll pass safely through your pipes. Put sanitary products, cotton wool and food scraps in the bin. Explain to children that even a small toy can get stuck in the curved outlet.

If the problem started after renovation or a toilet replacement, don't just blame how it's used. The outlet connection and the installation also need checking. When you call, tell us what changed, whether there are symptoms at another fixture and what you have tried. That way we can prepare for the job without unnecessary guesswork. If the toilet rocks or there are signs of water at its base, mention that separately: a blocked outlet and a leaking joint need different checks.

If the house was closed for a while, look at the water in the bowl before flushing. An unusually low water level and a weak flush are sometimes separate issues; don't put everything down to one blockage. It helps the technician to know whether the cistern fills completely and whether the flush has changed. A faulty cistern can cause a weak flush, but a rising water level in the bowl still means the outlet needs checking. Also note whether this is the first time or you've had similar trouble before. Describe both observations separately, and don't take the mechanism apart if you aren't familiar with it.

Help

When to call us

  • The water is rising by itself or nearing the rim of the bowl.
  • Water is also coming up in the floor drain or other fixtures at the same time.
  • A solid object fell into the toilet and you can no longer see it.
  • The problem soon comes back after clearing.
Call us

Service

Related service

We'll agree the method and scope of work for your case.

Toilet won't drain? Tell us what happened.

501 100 008
or message us:
Call