Skip to content
Sewage Pumping

Flooded basement: first steps

Before entering a flooded basement, the safety of the space has to be assessed. The water may hide electrical hazards, contamination and unseen openings. Don't go down into the basement to check on things. From a dry spot, restrict access, let the other residents know and gather information on when and where the water appeared.

Submersible pump in a flooded basement

Don't step into the water to switch off the power

Switching off the power in a flooded basement is an essential safety matter, but the way you switch it off must be safe too. If the electrical panel is beyond the water, don't go towards it. Don't touch a switch or appliance with wet hands. A light that has gone out doesn't prove there's no power either. If it can't be switched off safely from a dry spot, you need the help of the relevant specialist.

Neither rubber boots nor household gloves guarantee protection from electricity in water. Bringing in an extension cord to run a pump in an unassessed space is not allowed either. Power may come back after the external supply has been cut, so don't base safety only on there being no electricity at that moment. In immediate danger, leave the area and contact the relevant emergency service; arranging the pumping should continue once safety is ensured.

What to do from a dry spot

People gathering at the basement stairs doesn't help. Restrict entry and warn children, neighbours and pet owners. If it's a shared space, let the homeowners' association representative know. One contact person will gather information and make sure different residents don't start doing contradictory things at the same time. There's no need to approach the danger to take photos.

If the water supply valve is in a safe, dry place and you know which line it's for, closing it may reduce the inflow. But don't try to force an unknown shared valve. If you suspect sewage backflow, ask the connected apartments to stop using water. When it's raining, work near an outside opening only if neither the flow of water nor electricity poses a danger.

  1. 1.Stop anyone entering the basement and warn others too.
  2. 2.Arrange safe isolation of the power with the right person.
  3. 3.Shut off a known water source only from safe access, if possible.
  4. 4.Note the time and visible signs, without stepping into the water.
  5. 5.Contact us to plan the pumping and describe the hazards in advance.

Rain, water supply or sewage?

If it coincides with rain, the water may be coming in through an opening, surface run-off or the ground. A continuous inflow in dry weather may point to damage in the water supply. Contaminated water coming up from a floor drain calls for checking the outgoing sewer line. These signs help us choose where to start, but one observation isn't enough for a final diagnosis.

Don't assume clear water is safe. It may already have touched a contaminated surface or an electrical appliance. Tasting, testing by hand or sniffing up close to find the source is not allowed. It's more useful to know when it started, whether it was raining, which pipe the flow is near and whether shutting a known valve reduced the inflow. If you don't know the answer, just tell us so on the phone.

Why we don't start by simply switching on a pump

Before pumping, we need to know where the water is coming from and where it can be taken safely. Moving contaminated water into the yard, the street or another basement just moves the problem. Choosing the pump and hose depends on what's in the water, its volume and the discharge route. If the inflow continues, removing it alone may give only a temporary result.

During outside flooding, a high water level around the building puts pressure on the structure. In such conditions, quickly emptying the basement isn't always safe, and the situation needs assessing on site. Deformed walls, new cracks or strange noises call for extra caution. It's important for us to know about these signs in advance, so the pumping is planned after a proper assessment and isn't focused only on making the water disappear fast.

Saving belongings and cleaning up

Only move belongings when it's safe to get to them and you don't have to step into the water. Don't switch an electrical appliance back on just because it looks dry on the outside. Its condition should be checked by the relevant specialist. Don't carry items that have been in contaminated water into the clean living area uncovered. If the space hasn't been safely assessed yet, moving belongings should wait.

Pumping is not the same as drying and cleaning. Remaining damp, contaminated surfaces and damaged materials are separate jobs. What can be cleaned and what needs other treatment depends on the material and the contamination. Don't mix different disinfectants. Find out the scope of the work in advance, so you don't mistake water removal for a finished restoration and leave the next steps unattended.

Check the cause after pumping

Once the water is gone, we can better assess the pipes, the floor drain and any visible point of entry. With a sewer blockage, the outgoing line needs checking; with water supply damage, it must be confirmed that the leak has stopped after repair. With rainwater, the route of surface run-off and the building's protection need assessing. Each cause has its own fix, and a pump can't do all of their jobs.

Keep safely taken photos, the date of the flood and a description of the work. Agree within the homeowners' association who checks the shared space and who gets told if it happens again. If more work is needed, set out its scope and the person responsible. When you call, tell us about access to the basement, the likely source of the water and the state of the electrics. If the water level is still rising, mention that too: ongoing inflow has to be taken into account when planning the pumping. Don't replace an unconfirmed fact with a guess.

If the basement has shared storage or several owners' belongings, record their condition together only after safety has been confirmed. Moving items along the work route should be agreed with the people responsible. The pumping hose needs a clear path and people shouldn't walk on it. Let the neighbours know about any temporary change in using the entrance. These steps are about organising the work and are not permission to step into the water; the boundary of the safe zone has to be set by an on-site assessment.

Help

When to call us

  • Water needs pumping out of the basement once safety is ensured.
  • Sewage backflow is collecting in the basement.
  • The source has been stopped, but the water won't drain by itself.
  • The flooding keeps happening and you need the outgoing line checked.
Call us

Service

Related service

We'll agree the method and scope of work for your case.

Water in the basement? Tell us about the situation from a safe place.

501 100 008
or message us:
Call